The printer is a very important part of our day to day life. We all need a printer to get hard copies of our important files and documents within a few minutes. To use the printer for printing the documents, you need to install it first on your system. The installation process is pretty simple, but sometimes users are unable to install Printer 0x00003eb Error Windows 10. This technical trouble does not let the users use their printing device. Are you facing the same trouble with your printing device? Well! If you are unable to install printer Error 0x00003eb Windows 10, you can read this guide and find the most effective troubleshooting solution to fix your printer problems.
The Printer Installation Error 0x000003eb states
that ‘Unable to install the printer. Operation could not be completed ( error
0x00003eb). Before you start with the printer troubleshooting, one thing you
need to check and make sure that your printer drivers are up to date.
Below, we are sharing some simple and effective
troubleshooting solutions that can help you to get rid of the Printer
Installation Errors:
Troubleshooting Method 1: Check and make sure
Windows Installer Service is Running
- Press
the ‘Windows + R’ key together from your keyboard. Now, type ‘service.msc’
and click on the ‘Enter’ button.
- After
this, find the ‘Windows Installer Service’ in the displayed list. Once you
find it, double click on it.
- Check
your Startup type. It needs to be set to the ‘Automatic’. After that,
click on the ‘Start’ button in case the service is not running
already.
- Hit
the Apply button followed by ‘Ok’.
- Now,
try to install your printer again.
Hopefully, the aforementioned steps will surely
help you to get out of the ‘unable to install printer error 0x00003eb
Windows 10’ situation. In case not, proceed to the next step:
Troubleshooting Method 2: Perform Clean
Boot
Important – You need to unplug the external devices from your computer
and then try to install your printer.
Sometimes the reason behind Printer
Installation Error 0x000003eb is the third party software conflicts
with Microsoft Windows which causes a problem while working with Windows 10. To
troubleshoot the problem, a user needs to perform a clean boot in their Windows
10 computer and diagnose the problem by following step by step guidelines.
Once the user is done with the Clean Boot
process, they can install the printer without any hassle and start printing the
documents.
Troubleshooting Method 3: Registry Fix
Important- Backup
the Registry before you execute the troubleshooting steps mentioned
below:
- Press
the ‘Windows + R’ key from the keyboard and type ‘service.msc. After this,
hit the Enter button.
- Double
click ‘Printer Spooler Service’. After this, click on the Stop option to
stop the spooler service.
- Hit
the Apply button followed by the Ok.
- After
this, you need to press the ‘Windows + R’ key from your device. Enter
‘Regedit’ and click on the ‘Enter’ button to go to the ‘Registry
Editor’.
- Navigate
through the Registry key depending upon the architecture of your
device.
For 32Bit System
“HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows
NT x86\Drivers\Version-3”
For 64Bit System
“HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows
x64\Drivers\Version-3”.
- In
the next step, you need to delete all the keys listed in ‘Version 3’. You
need to click on keys and hit the delete button to remove them.
- Hit
‘Windows + R’ key from your keyboard and click the Enter button.
- Rename
the folder to 3.old from 3.
- At
last, start the Printer Spooler service again and try to install your
printing device.
Comments
Post a Comment